142
| Discovering, Adding, and Managing Devices
Dell PowerConnect W-AirWave 7.4
| User Guide
Figure 100
Add Virtual Interfaces Page for Wired Devices
.
New physical and virtual interfaces are discovered using SNMP polling as described in
“SNMP/HTTP Scanning”
on page
108
. To refresh and reload all current interface information from a device, select Import Interfaces on
the bottom of the page as shown in
Figure 101
.
Figure 101
Import Interfaces for Refresh and Reload (lower portion of page)
You can view details for each interface on a wired device from its individual interface page as well. For details, see
“Understanding the APs/Devices > Interfaces Page” on page
132
.
You can configure interface settings individually or in groups. For individual settings, select the pencil icon next
the interface name in AP/Devices > Interfaces.
This takes you to the Interfaces Monitoring and Configuration window which has a slightly different appearance
depending on whether you are configuring a physical or virtual interface, as shown in
Figure 102
and
Figure 103
.
Summary of Contents for PowerConnect W-Airwave
Page 1: ...Dell PowerConnect W AirWave 7 4 User Guide ...
Page 106: ...106 Configuring and Using Device Groups in AirWave Dell PowerConnect W AirWave 7 4 User Guide ...
Page 256: ...256 Creating Running and Emailing Reports Dell PowerConnect W AirWave 7 4 User Guide ...
Page 310: ...310 Index Dell PowerConnect W AirWave 7 4 User Guide ...
