Dell PowerConnect W-Airwave, User Manual

Page: 82 / 310

82 | Configuring and Using Device Groups in AirWave Dell PowerConnect W-AirWave 7.4 | User Guide
Figure 41
Groups > Security Page Illustration
Table 55
Groups > Security Page Fields and Default Values
Setting Default Description
VLANs Section
VLAN Tagging and Multiple
SSIDs Enabled This field enables support for VLANs and multiple SSIDs on the wireless network. If
this setting is enabled, define additional VLANs and SSIDs on the Groups > SSIDs
page. Refer to
“Configuring Group SSIDs and VLANs” on page 83 .
Management VLAN ID Untagged This setting sets the ID for the management VLAN when VLANs are enabled in
AirWave. This setting is supported only for the following devices:

Proxim AP-600, AP-700, AP-2000, AP-4000

Avaya AP-3, Avaya AP-7, AP-4/5/6, AP-8

ProCurve520WL
General Section
Create Closed Network No If enabled, the APs in the Group do not broadcast their SSIDs.
NOTE: Creating a closed network will make it more difficult for intruders to detect
your wireless network.
Block All Inter-client
Communication No If enabled, this setting blocks client devices associated with an AP from
communicating with other client devices on the wireless network.
NOTE: This option may also be identified as PSPF (Publicly Secure Packet
Forwarding), which can be useful for enhanced security on public wireless
networks.
EAP Options Section
WEP Key Rotation Interval 300 Sets the frequency at which the Wired Equivalent Privacy (WEP) keys are rotated in
the device group being configured. The supported range is from 0 to 10,000,000
seconds.
RADIUS Authentication Servers Section
RADIUS Authentication
Server #1 - #4 Not selected Defines one or more RADIUS Authentication servers to be supported in this device
group. Select up to four RADIUS authentication servers from the four drop-down
menus.