Dell C2660dn User Manual Download Page 47

Page: 47 / 361

Configuring the Optional Wireless Adapter

This section describes how to configure a wireless adapter.

You can select a method to configure a wireless adapter from the following:

Wizard Setup through USB Cable(recommended)

WPS-PBC

*1*3

WPS-PIN

*2*3

Advanced Setup through

Operator Panel
Ethernet Cable
Dell Printer Configuration Web Tool

WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register devices required for wireless

configuration, by pressing the button provided on the access point via wireless routers, and then performing WPS-PBC setting on the

operator panel. This setting is available only when the access point supports WPS.

WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and register devices required for wire

less configuration, by entering PIN assignments in the printer and computer. This setting, performed through access point, is available

only when the access points of your wireless router supports WPS.

WPS 2.0 compliant. WPS 2.0 works on access points with the following encryption types: Mixed mode PSK, WPA-PSK AES,

WPA2-PSK AES, WPA-PSK TKIP, Open (No Security)

NOTE:

The optional wireless adapter must be installed on the printer. For information on how to install a wireless adapter, see

"Installing the Optional Wireless Adapter."

NOTE:

If the

Panel Lock Control

is set to

Enable

, you need to enter the four digit password to enter the

Admin

Settings

menu.

NOTE:

For details about using WPA-Enterprise-AES, WPA2-Enterprise-AES, or WPA-Enterprise-TKIP, see "Using Digital

Certificates."

Configuring the Wireless Adapter Using Dell Printer Setup

Insert the

Software and Documentation

disc provided with the printer on your computer. The

Dell Printer Setup

program launches automatically.

Click

Setup

Click

Wireless

Follow the on-screen instructions, and configure the wireless setting of the printer.

For

WPS-PIN

WPS-PBC

Operator Panel

, and

Dell Printer Configuration Web Tool

, see the following

instructions.

Installing Optional Accessories

Summary of Contents for C2660dn










































































































































































































































































































































































Search results

Summary of Contents for C2660dn

Reviews:

Brands by name

Popular brands

Dell C2660dn, User Manual

Search results

Summary of Contents for C2660dn

Reviews:

Brands by name

Popular brands