Dell C2660dn User Manual Download Page 139

Page: 139 / 361

Magenta Toner Cartridge

Displays the magenta toner level.

Yellow Toner Cartridge

Displays the yellow toner level.

Black Toner Cartridge

Displays the black toner level.

The menu title is displayed only when Wi-Fi Direct is set to Enable.

This item is displayed only when Wi-Fi Direct is set to Enable.

Google Cloud Print

Purpose:

To register the printer to Google Cloud Print.

Values:

Google Cloud Print

(Registration state)

Displays the Google Cloud Print registration state.

Register This Device to

Click to register the printer to Google Cloud Print.

Google Cloud Print

Google Cloud Print can only be used when the machine is using IPv4.

Proxy Server

Purpose:

To configure the Proxy Server settings.

Values:

Proxy Server

Use Proxy Server

Sets whether to enable the use of a proxy server.

Address to Bypass Proxy

Sets the address to bypass proxy server.

Server
Server Name

Sets the name of the proxy server.

Port Number

Sets the port number from 1 to 65535.

Authentication

Sets whether to enable authentication.

Login Name

Sets the login name for the proxy server.

Password

Sets the login password for the proxy server.

Retype Password

Confirms the set password.

Dell™ Printer Configuration Web Tool

137

Summary of Contents for C2660dn










































































































































































































































































































































































Search results

Summary of Contents for C2660dn

Reviews:

Brands by name

Popular brands

Dell C2660dn, User Manual

Search results

Summary of Contents for C2660dn

Reviews:

Brands by name

Popular brands