Dell C2660dn, User Manual

Page: 137 / 361

SNMP v1/v2c
Purpose:
To edit the detailed settings of SNMP v1/v2 protocol.
To enter this page, click Edit SNMP v1/v2 Properties in the SNMP page.
Values:
Community Name Community Name
(Read only)
*1
Sets the community name to access (read only) data using up to 31
alphanumeric characters.
The original setting will remain valid if no input is made. Characters
entered for community name in the previous settings will not be displayed
on the screen. The default Read Community is public.
Re-enter Community
Name (Read only)
*1
Enters the community name to access (read only) data again to confirm it.
Community Name
(Read/Write)
*1
Sets the community name to access (read and write) data using up to 31
alphanumeric characters.
The original setting will remain valid if no input is made. Characters
entered for community name in the previous settings will not be displayed
on the screen. The default Read/Write Community is private.
Re-enter Community
Name (Read/Write)
*1
Enters the community name to access (read and write) data again to
confirm it.
Community Name
(Trap)
*1
Sets the community name used for trap up to 31 alphanumeric characters.
The original setting will remain valid if no input is made. Characters
entered for Community Name (Trap) in the previous settings will not be
displayed on the screen. The default Trap Community is " " (NULL).
Re-enter Community
Name (Trap)
*1
Enters the community name used for trap again to confirm it.
Trap Notification 1-4 Trap Address Type
Trap Address
Port Number
Notify
Network
*2
Select the check boxes to notify trap occurrence. In this case, specify the IP
address and IP socket in the following format:
IPv4
Specify the IP address and IP socket in the nnn.nnn.nnn.nnn:mmmmm
format. Each section of "nnn" is a variable value between 0 and 255. Note
that values 127 and 224-254 are not valid for the first three-digits only. IP
socket mmmmm is a variable value between 0 and 65,535.
IPv6
Specify the IP address and IP socket in the
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmmmm format. Each section
of "xxxx" is a hexadecimal variable value between 0 and ffff. IP socket
mmmmm is a variable value between 0 and 65,535.
Authenticate Error Trap Select the check box to notify Authenticate Error Trap.
*1
The default value can be changed by using Dell Printer Configuration Web Tool.
*2
This item is available only when Wi-Fi Direct is set to Enable.
Dell™ Printer Configuration Web Tool
135