manualshive.com logo in svg

Dell C2660dn, User Manual

Share
Download
Dell C2660dn User Manual Download Page 277

5 

Slightly pressing down the tab on the drum cartridge that you want to replace, pull it out halfway with one hand. 

6 

Support the drum cartridge with the other hand from underneath, and then pull it out completely. 

7 

Repeat the steps 5 and 6 to remove the other three cartridges. 

Installing a Drum Cartridge 

1 

Unpack a new drum cartridge of the desired color. 

2 

Remove the orange protective cover from the drum cartridge. 

3 

Insert the drum cartridge into the associated cartridge slot, and then push until it stops. 

Repeat the steps 1 to 3 to insert the other three cartridges. 

Maintaining Your Printer 

275 

4 

Summary of Contents for C2660dn










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands