Dell C2660dn User Manual Download Page 186

Page: 186 / 361

Secure Job Expiration

NOTE:

Secure Job Expiration feature is available only when

RAM Disk

is set to

Purpose:

To specify the date and time to delete the files stored as Secure Print in the RAM disk.

Values:

Expiration Mode

Off

Does not set the date and time to delete the files stored as Secure Print in

the RAM disk.

Sets the date and time to delete the files stored as Secure Print in the RAM

disk.

Expiration Time

Sets the time to delete the files stored as Secure Print in the RAM disk.

Recurrence

Daily

Sets the recurrence to delete the files stored as Secure Print in the RAM disk

daily.

Weekly*

Sets the recurrence to delete the files stored as Secure Print in the RAM disk

weekly.

Monthly

Sets the recurrence to delete the files stored as Secure Print monthly.

Weekly Setting

Monday

Sets the day of the week to delete the files stored as Secure Print.

Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday

Monthly Setting

1 Day

Sets the day of the month to delete the files stored as Secure Print in the

Available Range:

RAM disk.

1-28 days

ColorTrack Mode

Purpose:

To specify who has access to color printing.

Values:

Off

Does not limit access to color printing.

Limits access to color printing. Authentication is done using user information registered on the printer.

Non Registered User

Purpose:

To specify whether to permit the printing of data without authentication information.

Values:

Off

Does not permit non-account user to print the data.

Permits non-account user to print the data.

Set Non Account User Password using the Dell Printer Configuration Web Tool.

Understanding the Printer Menus

184

Summary of Contents for C2660dn










































































































































































































































































































































































Search results

Summary of Contents for C2660dn

Reviews:

Brands by name

Popular brands

Dell C2660dn, User Manual

Search results

Summary of Contents for C2660dn

Reviews:

Brands by name

Popular brands