Dell C2660dn User Manual Download Page 242

Page: 242 / 361

NOTE:

The Status Monitor Console is available when the printer is connected to a network (LPR or Socket 9100). USB

connection is not supported.

Distributions

• Red Hat

Enterprise Linux

5 Desktop

•

Red Hat Enterprise Linux 6 Desktop

• SUSE

Linux Enterprise Desktop 10

•

SUSE Linux Enterprise Desktop 11

Printing system

•

CUPS (Common Unix Printing System)

Installing the Status Monitor Console

Activate the terminal, and log in as a super user.

Type the following rpm command in the terminal window.

# rpm -ivh

(Type the package file name)

Starting the Status Monitor Console

Click

Dell Printers

→

Status Monitor Console

The

Printer Selection

window appears.

For more information on Printer Selection window, see "Printer Selection Window."

Select your printer.
The

Printer Status

window appears.

For more information on

Printer Status

window, see "Printer Status Window."

•

You can order supplies from the

Dell Supplies Management System

window. See "Dell Supplies Management

System Window."

Printer Selection Window

Printers list

All the printers registered in the CUPS (Common UNIX Printing System) are displayed in a list.

•

Status icons:

Ready

Unknown/Offline/Toner Low/Paper Low

Understanding Your Printer Software

240

Summary of Contents for C2660dn










































































































































































































































































































































































Search results

Summary of Contents for C2660dn

Reviews:

Brands by name

Popular brands

Dell C2660dn, User Manual

Search results

Summary of Contents for C2660dn

Reviews:

Brands by name

Popular brands