Dell C2660dn User Manual Download Page 119

Page: 119 / 361

Network Settings

Purpose:

To Specify the PostScript Level3 Compatible communication protocol for this printer.

Values:

PS Data Format

Sets PostScript Level3 Compatible communication protocol for each interface.

USB Settings

Purpose:

To change USB settings on your printer.

Values:

USB Port

Enables the USB interface on your printer.

PS Data Format

Sets PostScript Level3 Compatible communication protocol for each interface.

Job Time-out

Displays the amount of time the printer waits for data to arrive from the computer.

PCL Settings

Purpose:

To change the PCL settings.

Values:

Paper Tray

Sets the paper input tray.

Paper Size

Sets the paper size.

Custom Paper Size - Y

Sets the length of custom size paper. The available range is from 127 mm (5.0 inch) to 355 mm (14.0

inch).

Custom Paper Size - X

Sets the width of custom size paper. The available range is from 77 mm (3.0 inch) to 215 mm (8.5

inch).

Orientation

Sets how text and graphics are oriented on the page.

2 Sided Print

Sets duplexing as the default for all print jobs.

Font

Sets the font from the list of registered fonts.

Symbol Set

Sets a symbol set for the specified font.

Font Size

Sets the font size for scalable typographic fonts.

Font Pitch

Sets the font pitch for scalable mono spaced fonts.

Form Line

Sets the number of lines in a page.

Quantity

Sets the number of copies to print.

Image Enhance

Sets whether to enable the Image Enhancement feature.

Hex Dump

Sets whether to help isolate the source of a print job problem. With Hex Dump selected, all data

sent to the printer is printed in hexadecimal and character representation. Control codes are not

executed.

Draft Mode

Sets whether to print in the draft mode.

Line Termination

Sets how to handle line terminations.

Default Color

Sets the print color mode as

Color

Black

. This setting is used for print jobs without a specified

color print mode.

Ignore Form Feed

Sets whether to ignore blank pages that only contain Form Feed control codes.

Dell™ Printer Configuration Web Tool

117

Summary of Contents for C2660dn










































































































































































































































































































































































Search results

Summary of Contents for C2660dn

Reviews:

Brands by name

Popular brands

Dell C2660dn, User Manual

Search results

Summary of Contents for C2660dn

Reviews:

Brands by name

Popular brands