Dell C2660dn User Manual Download Page 131

Page: 131 / 361

Port Settings

Purpose:

To enable or disable printing ports and management protocol features.

Values:

Ethernet

Ethernet Settings

Auto

Detects the Ethernet transmission rate and the

duplex settings automatically.

10Base-T Half-Duplex

Selects 10Base-T Half-Duplex as the default

value.

10Base-T Full-Duplex

Selects 10Base-T Full-Duplex as the default

value.

100Base-TX Half-Duplex

Selects 100Base-TX Half-Duplex as the default

value.

100Base-TX Full-Duplex

Selects 100Base-TX Full-Duplex as the default

value.

1000Base-T Full-Duplex

Selects 1000Base-T Full-Duplex as the default

value.

Current Ethernet Settings

Displays the current settings of the Ethernet.

MAC Address

Displays the MAC address of the printer.

Port Status

LPD

Sets whether to enable LPD.

Port9100

Sets whether to enable Port9100.

IPP

Sets whether to enable IPP.

WSD Print

Sets whether to enable WSD Print.

FTP

Sets whether to enable FTP.

SMB

Sets whether to enable SMB.

Bonjour (mDNS)

Sets whether to enable Bonjour (mDNS).

E-Mail Alert

Sets whether to enable E-Mail Alert.

Telnet

Sets whether to enable Telnet.

SNMP

Sets whether to enable SNMP.

SNTP

Sets whether to enable SNTP.

Google Cloud Print

Sets whether to enable Google Cloud Print.

This item is available only when the printer is connected using an Ethernet cable.

NOTE:

The settings in the Port Settings page will be valid only when the printer is rebooted. When you change or configure the

settings, click the Apply New Settings button to apply the new settings.

Dell™ Printer Configuration Web Tool

129

Summary of Contents for C2660dn










































































































































































































































































































































































Search results

Summary of Contents for C2660dn

Reviews:

Brands by name

Popular brands

Dell C2660dn, User Manual

Search results

Summary of Contents for C2660dn

Reviews:

Brands by name

Popular brands