Dell C2660dn User Manual Download Page 159

Page: 159 / 361

Color - Side 2
Plain Thick - Side 2
Recycled - Side 2

Tray 2 Display

Popup

Tray 2 Paper Size

On
Off

Auto
Custom Size

Displays a popup message that prompts the user to

set Paper Type and Paper Size when the paper is

loaded in the optional 550-sheet feeder.
Sets the size of paper loaded in the optional 550

sheet feeder.

Tray 2 Custom Size 

Available Range:

210–355 mm (8.3–14.0 inches)

Sets the length of custom size paper loaded in the

optional 550-sheet feeder.

Tray 2 Custom Size 

Tray 2 Paper Type

Available Range:

148–215 mm (5.8–8.5 inches)
Plain
Plain Thick

Sets the width of custom size paper loaded in the

optional 550-sheet feeder.
Sets the type of paper loaded in the optional 550

sheet feeder.

Covers(106–163g/m

)

Covers Thick(164–216g/m

)

Coated(106–163g/m

)

Coated Thick(164–216g/m

)

Recycled
Letterhead
Preprinted
Prepunched
Color
Plain - Side 2
Color - Side 2
Plain Thick - Side 2
Recycled - Side 2

Tray Priority

MPF->Tray1

Sets the priority order of the paper trays.

Tray1->MPF
MPF->Tray1->Tray2

MPF->Tray2

->Tray1

Tray1->MPF->Tray2

Tray1->Tray2

->MPF

Tray2

->MPF->Tray1

Tray2

->Tray1->MPF

Apply New Settings

After you change the settings, click this button to

apply the changes.

Restart printer to apply new settings

Click this button to restart the printer and apply the

changes.

This item is available only when MPF Mode is set to Panel Specified.
This item is available only when the optional 550-sheet feeder is installed.

NOTE:

For details about the paper density for paper types, see "Paper Type Specifications."

Understanding the Tool Box Menus

157

Summary of Contents for C2660dn










































































































































































































































































































































































Search results

Summary of Contents for C2660dn

Reviews:

Brands by name

Popular brands

Dell C2660dn, User Manual

Search results

Summary of Contents for C2660dn

Reviews:

Brands by name

Popular brands