Dell C2660dn, User Manual

Page: 142 / 361

Reset Print Server
Purpose:
To initialize NVRAM (non-volatile RAM) for the network feature and reboot the printer. You can also initialize
NVRAM of the printer from Reset Defaults in the Printer Settings menu.
Values:
Initialize NIC NVRAM Memory
Click
Start
to initialize NVRAM, revert network settings to the factory default settings, and
and restart printer. reboot the network capability.
Restart Printer Click Start to reboot the printer.
Security
The Security tab includes Set Password , SSL/TLS , IPsec , 802.1x , and IP Filter (IPv4) .
Set Password
Purpose:
To set or change the password that is required to access the setup parameters of the printer from the Dell Printer
Configuration Web Tool . This page can also be displayed by clicking Set Password in the left frame.
NOTE:
To restore the password to the default (NULL), initialize the non-volatile memory (NVM).
NOTE:
You can set the password for access to
Admin Settings
from Panel Lock in Printer Settings.
Values:
Administrator Password Sets the password using up to 128 alphanumeric characters (excluding spaces and
colons). If more than 128 alphanumeric characters are specified, only the first 128
alphanumeric characters will be valid.
Re-enter Administrator Password Confirms the set password.
Access denial by the authentication Sets the amount of time the administrator should wait for the access to the printer
failure of the Administrator setup from Dell Printer Configuration Web Tool . Sets the time period from 5 to 255
seconds. The access is denied if the time-out time is exceeded. If you set 0, this mode
is disabled.
SSL/TLS
Purpose:
To specify the settings for the SSL encryption communication to the printer, and set/delete the certificate used for
IPsec, or Wireless LAN.
Values:
HTTP-SSL/TLS Select the check box to enable the HTTP-SSL/TLS Communication.
Communication
*1
HTTP-SSL/TLS Sets the port number, which is not identical with that of HTTP for SSL/TLS. This must be 443 or
Communication Port between 8000 and 9999.
Number
SMTP-SSL/TLS
Sets the type of SSL/TLS used to communicate with the SMTP server.
Communication
Generate Self-Signed
Click to display the Generate Self-Signed Certificate page and to create a security certification from
Certificate
*2
the page. The Generate Self-Signed Certificate button is available only when the self-signed
certificate is not generated.
Public Key Method Select the public key method of the self-signed certificate.
Dell™ Printer Configuration Web Tool
140