Diagnostic aids
3-5
Select
Exit Diagnostics
to exit the Diagnostics menu.
Resetting the Printer
displays, the printer
performs a POR, and returns to Ready mode.
REGISTRATION
Print registration makes sure the printing is printed properly aligned on the page.
The settings available are:
Top Margin
Bottom Margin
Left Margin
Right Margin
Quick Test
To set print registration:
1.
Select
REGISTRATION
from the DIAGNOSTICS menu.
2.
Select Quick Test, and press
.
To print the Quick Test page:
a.
Press
until the
appears next to
Quick Test
.
b.
Press .
The message
Quick Test Printing…
appears on the display.
Retain this page to determine the changes you need to make to the margins settings.
3.
Use
or
to select the margin setting you need to change, and press
.
4.
Use
to decrease or
to increase the values, and press
to reset the value.
The message
Submitting selection
displays, and the original REGISTRATION screen appears with
the
beside the previously selected margin setting.
EP SETUP
EP Defaults
See
“EP Defaults” on page 3-21
Fuser Temp
See
“Fuser Temperature (Fuser Temp)” on page 3-21
Fuser Page Count
See
“Fuser Page Count” on page 3-21
Warm Up Time
See
“Warm Up Time” on page 3-21
Transfer
See
“Transfer” on page 3-21
Print Contrast
See
“Print Contrast” on page 3-22
Charge Roll
See
“Charge Roll” on page 3-22
Gap Adjust
See
“Gap Adjust” on page 3-22
EVENT LOG
Display Log
See
“Display Log” on page 3-23
Print Log
See
“Print Log” on page 3-23
Clear Log
See
“Clear Log” on page 3-24
EXIT DIAGNOSTICS
Exiting Diagnostics mode (models 5230n/dn, 5350dn, and 5530dn)
Summary of Contents for 5230DN
