manualshive.com logo in svg

Dell 5230DN, Service Manual

Share
Download
Dell 5230DN Service Manual Download Page 234

3-28

Service Manual

Factory Defaults

This setting enables a user to restore all the printer settings to the original factory settings. Selections are 

Restore Base

 and 

Restore Network

. Network does not appear unless you have a network printer. The 

following settings are not changed:

•

Display language

•

Settings in the NETWORK/PORTS MENU group.

LES Applications 

Settings are 

Disable

 and 

Enable

. The default is Enable.

Energy Conserve

This menu controls what values appear on the Power Saver menu. If 

Off

 is selected in Energy Conserve 

menu, then Disabled appears in the Power Saver menu and Power Saver can be turned off. If 

On

 is set in 

Energy Conserve, the Power Saver feature cannot be disabled.

Paper Prompts

When a tray is out of the indicated paper size, a prompt is sent to the user to load paper in a tray. This setting 
controls the tray the user is directed to fill. Selections are 

Auto

 (default), 

MP Feeder

, and 

Manual Paper

.

Env Prompts

This setting controls the tray the user is directed to refill when specific envelope size is out. The selections are 

Auto

 (default), 

MP Feeder

,

Envelope Feeder

, and 

Manual Env

.

Action for Prompts 

The three settings are 

Prompt user

,

Continue

, or 

Use current

. Make a setting change, and the press 

. 

Submitting selection

 appears on the display.

Font Sharpening 

The settings range from 0 to 150. The default is 24. Make a setting change, and then press 

. 

Submitting 

selection

 appears on the display.

Wiper Messages

Settings are 

On

 and 

Off

. The default is 

On

. Make a setting change, and then press 

. 

Submitting 

selection

 appears on the display.

Clear Custom Status

No values exist for this operation. Pressing 

 initiates this operation.

Note:

Executing this operation erases any strings that have been defined by the user for the default or 

alternate custom messages. 

This disables all installed LXK Embedded Solution applications. 

Summary of Contents for 5230DN











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands