manualshive.com logo in svg

Dell 5230DN, Service Manual

Share
Download
Dell 5230DN Service Manual Download Page 246

3-40

Service Manual

2.   

When the motor stops, the results are displayed. Listed below is an example of such results:

3.   

Touch 

Back

 or press 

Stop

 

 to exit the test.

Duplex Feed 1

This test feeds a blank sheet of paper to the duplex paper stop position 1. This test can be run using any of the 
supported paper sizes.

To run the Duplex Feed 1 Test:

1.   

Touch  

to 

select 

Duplex Feed 1

 from DUPLEX TESTS.

The power indicator blinks while the paper is feeding, and the message 

Duplex Feed 1 Feeding

…

displays.
The message 

Duplex Feed 1 Clear Paper

 displays when the paper reaches paper stop position 1, 

and the power indicator turns on solid.

2.   

Remove the media from the duplex unit, and clear the message on the operator panel by pressing 

Stop

.

Duplex Feed 2

This test feeds a blank sheet of paper to the duplex paper stop position 2. This test can be run using any of the 
supported paper sizes.

To run the Duplex Feed 2 Test:

1.   

Touch  

to 

select 

Duplex Feed 2

 from DUPLEX TESTS.

The power indicator blinks while the paper is feeding, and the message 

Duplex Feed 2 Feeding

…

displays.
The message 

Duplex Feed 2 Clear Paper

 displays when the paper reaches the duplex paper stop 

position 2, and the power indicator turns on solid.

2.   

Remove the media from the duplex unit, and clear the message on the operator panel by touching 

Back

 or 

pressing

Stop

.

INPUT TRAY TESTS

Feed Tests (input tray)

This test lets the servicer observe the paper path as media is feeding through the printer. A blank sheet of 
paper feeds through the printer as the laser turns off during this test. The only way to observe the paper path is 
to open the lower front door that is used to access the envelope or multipurpose feeder. The paper is placed in 
the output bin.

To run the Input Tray Feed Tests:

1.   

Touch  

to 

select

 Feed Tests

 from INPUT TRAY TESTS.

2.   

Touch 

 to select the input source from the sources displayed on the Feed Tests menu. All installed 

sources are listed.

3.   

Touch 

 to select either Single or Continuous. 

•

Single

– feeds one sheet of media from the selected source.

•

Continuous–

media continues feeding from the selected source until 

Stop

 

 is pressed.

Duplex Motor Test Test Passed
Avg. PWM of High-Speed Test: 1d
Avg. PWM of Low-Speed Test: Oe
Max. PWM of Low-Speed Test: 00
Min. PWM of Low-Speed Test: 0b
Motor KE Value: 2d
Motor Test Results: 00

Summary of Contents for 5230DN











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands