manualshive.com logo in svg

Dell 5230DN, Service Manual

Share
Download
Dell 5230DN Service Manual Download Page 521

Preventive maintenance

6-1

6.  Preventive maintenance

This chapter describes procedures for printer preventive maintenance. Following these recommendations can 
help prevent problems and maintain optimum performance.

Safety inspection guide

The purpose of this inspection guide is to aid you in identifying unsafe conditions.

If any unsafe conditions exist, find out how serious the hazard could be and if you can continue before you 
correct the hazard.

Check the following items:

•

Damaged, missing, or altered parts, especially in the area of the on/off switch and the power supply. 

•

Damaged, missing, or altered covers, especially in the area of the top cover and the power supply cover. 

Lubrication specifications

No requirements for this printer.

Individual maintenance part expected life 

Description

Part number

Expected part life

Charge roll assembly with tool

40X5852

300K

Transfer roll assembly with tool

40X1886

300K

Pick roll assembly (2)

40X4308

300K

Printer maintenance kit (100 V type 1 fuser)

40X4723

300K

Printer maintenance kit (110 V type 1 fuser)

40X4724

300K

Printer maintenance kit (220 V type 1 fuser)

40X4765

300K

Printer maintenance kit (100 V type 2 fuser)

40X4766

150K

Printer maintenance kit (110 V type 2 fuser)

40X4767

150K

Printer maintenance kit (220 V type 2 fuser)

40X4768

150K

•

Possible safety exposure from any non-Dell attachments.

Summary of Contents for 5230DN











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands