Dell 5230DN Service Manual Download

Page: 107 / 586

Diagnostic information

2-73

28x.40

x = bin
number

Left tamper does not
leave home position
failure

Applies to:

StapleSmart finisher

The sensor (left tamper HP)
does not detect that the tamper
has moved from home position.

1. Check all the connections on
the output option controller
card.

2. Check the tamper drive belt
for damage and replace if
needed.

3. Replace the left tamper
motor assembly.

Go to

“SFP stapler assembly

tamper drive motor

assembly removal” on

page 4-181

4. Replace the sensor (tamper
HP).

Go to

“SFP stapler assembly

sensor (tamper HP left and

right) removal” on

page 4-188

4. Replace the output option if
problem remains.

28x.41

x = bin
number

Left tamper does not
move to home
position failure.

Applies to:

StapleSmart finisher

The sensor (left tamper HP)
does not detect that the tamper
has reached home position.

1. Check all the connections on
the output option controller
card.

2. Check the tamper drive belt
for damage and replace if
needed.

3. Replace the left tamper
motor assembly.

Go to

“SFP stapler assembly

tamper drive motor

assembly removal” on

page 4-181

4. Replace the sensor (tamper
HP).

Go to

“SFP stapler assembly

sensor (tamper HP left and

right) removal” on

page 4-188

4. Replace the output option if
problem remains.

Error

code or

message

Error contents

Description/Action

Possible repair actions

Summary of Contents for 5230DN











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5230DN

Reviews:

Related manuals for 5230DN

Brands by name

Popular brands

Dell 5230DN, Service Manual

Search results

Summary of Contents for 5230DN

Reviews:

Related manuals for 5230DN

Brands by name

Popular brands