Dell 5230DN Service Manual Download

Page: 136 / 586

2-102

Service Manual

927.11

Print cartridge cooling
fan failure

The print cartridge cooling fan
is obstructed or has failed.

1. Check for cooling fan

obstructions.

2. Check the connections on

the main cooling fan.

3. Replace the print cartridge

cooling fan. Go to

“Print

cartridge cooling fan

removal” on page 4-57

927.13

Print cartridge cooling
fan control failure.

The Print cartridge cooling fan
does not reach the specified
speed.

1. Check for cooling fan

obstructions.

2. Check the connections on

the main cooling fan.

3. Replace the print cartridge

cooling fan. Go to

“Print

cartridge cooling fan

removal” on page 4-57

927.14

Print cartridge cooling
fan underspeed
failure

The Print cartridge cooling fan
does not reach the specified
speed.

1. Check for cooling fan

obstructions.

2. Check the connections on

the main cooling fan.

3. Replace the print cartridge

cooling fan. Go to

“Print

cartridge cooling fan

removal” on page 4-57

927.15

Print cartridge cooling
fan over speed failure.

The Print cartridge cooling fan
does not reach the specified
speed.

1. Check for cooling fan

obstructions.

2. Check the connections on

the main cooling fan.

3. Replace the print cartridge

cooling fan. Go to

“Print

cartridge cooling fan

removal” on page 4-57

927.16

Print cartridge cooling
fan over speed failure.

The Print cartridge cooling fan
does not reach the specified
speed.

1. Check for cooling fan

obstructions.

2. Check the connections on

the main cooling fan.

3. Replace the print cartridge

cooling fan. Go to

“Print

cartridge cooling fan

removal” on page 4-57

927.17

Print cartridge cooling
fan over speed failure.

The Print cartridge cooling fan
does not reach the specified
speed.

1. Check for cooling fan

obstructions.

2. Check the connections on

the main cooling fan.

3. Replace the print cartridge

cooling fan. Go to

“Print

cartridge cooling fan

removal” on page 4-57

929.01

Sensor (toner empty)
sensor failure.

The sensor (toner empty) does
not provide toner level
feedback or the print cartridge
is damaged.

1. Check the toner pulse

wheel on the print cartridge
for damage and replace the
print cartridge if needed.

2. Check the sensor (toner

empty) for proper
operation. See

“Sensor

(toner empty) service

check” on page 2-148

Error

code or

message

Error contents

Description/Action

Possible repair actions

Summary of Contents for 5230DN











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5230DN

Reviews:

Related manuals for 5230DN

Brands by name

Popular brands

Dell 5230DN, Service Manual

Search results

Summary of Contents for 5230DN

Reviews:

Related manuals for 5230DN

Brands by name

Popular brands