Dell 5230DN Service Manual Download

Page: 111 / 586

Diagnostic information

2-77

28x.54

x = bin
number

Eject motor encoder
not detected

Applies to:

StapleSmart finisher

The eject motor encoder
detection is lost during normal
operation.

1. Check all the connections on
the output option controller
card.

2. Replace the output option if
problem remains.

28x.55

x = bin
number

Eject motor
overspeed failure

Applies to:

StapleSmart finisher

The eject motor rotate at the
specified speed

1. Check all the connections on
the output option controller
card.

2. Replace the output option if
problem remains.

28x.56

x = bin
number

Eject motor
underspeed failure

Applies to:

StapleSmart finisher

The eject motor rotate at the
specified speed

1. Check all the connections on
the output option controller
card.

2. Replace the output option if
problem remains.

28x.57

x = bin
number

Sensor (stapler pass
through) static jam

Applies to:

StapleSmart finisher

Media remains on the sensor
(stapler pass through) during
the warm up sequence.

Go to sensor (stapler pass
through) static jam service
check.

See

“Sensor (stapler pass

through) static jam service

check” on page 2-143

28x.58

x = bin
number

Sensor (stapler pass
through) late jam

StapleSmart finisher

The media is late reaching the
sensor (stapler pass through)
within the specified time.

See

“Sensor (output pass

through) late jam service

check” on page 2-143

28x.59

x = bin
number

Staple ready home
position jam

Applies to:

StapleSmart finisher

The sensor (self priming) within
the stapler assembly does not
detect a ready staple in the
specified time after the staple
job was sent.

1. Check all the connections on
the controller card and the
stapler assembly.

2. Remove the staple cartridge
and remove all jammed
staples. If the cartridge is
jammed and can not be
removed, go to step 3.

3. Remove the stapler
assembly.

Go to

“SFP stapler assembly

stapler unit assembly

removal” on page 4-183

4. Manually rotate the drive
gears and reset the stapler.
Remove all jammed staples
then reinstall the stapler
assembly.

5. If problem remains, replace
the stapler assembly.

Go to

“SFP stapler assembly

stapler unit assembly

removal” on page 4-183

28x.60

x = bin
number

The status of stapler
motor is not defined

Applies to:

StapleSmart finisher

A software failure has occurred
with the output option.

1. Turn the machine off/on.

2. Replace the output option if
problem remains.

Error

code or

message

Error contents

Description/Action

Possible repair actions

Summary of Contents for 5230DN











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5230DN

Reviews:

Related manuals for 5230DN

Brands by name

Popular brands

Dell 5230DN, Service Manual

Search results

Summary of Contents for 5230DN

Reviews:

Related manuals for 5230DN

Brands by name

Popular brands