manualshive.com logo in svg

Dell 5230DN, Service Manual

Share
Download
Dell 5230DN Service Manual Download Page 48

2-14

Service Manual

Error code table

 1

Error 

code or 

message

Error contents

Description/Action

Possible repair actions

200.00

Sensor (input) area 
jam

The media is jammed in the 
sensor (input) area.

1. Fan the media and check for 
obstructions.

2. Go to sensor (input) service 
check.

See

“Sensor (input) service 

check” on page 2-120

.

200.01

Sensor (input) 
lingering jam

Source = MPF, duplex 
or envelope feeder

The media reached the sensor 
(input) but did not clear it within 
the specified time.

1. Fan the media and check for 
obstructions.

2. Go to sensor (input) 
lingering jam service check. 

See

“Sensor (input) lingering 

jam service check.” on 

page 2-126

.

200.02

Sensor (input) 
lingering jam

The media reached the sensor 
(input) but did not clear it within 
the specified time.

1. Fan the media and ensure it 
is properly installed.

2. Go to sensor (input) 
lingering jam service check. 

See

“Sensor (input) lingering 

jam service check.” on 

page 2-126

.

200.04

Sensor (input) early 
jam

The media reached the sensor 
(input) sooner than the 
specified time.

Wrong config ID causes engine 
to assume 500 paper path on 
250 model.

1. Fan the media and ensure it 
is properly installed.

2. Go to sensor (input) early 
jam service check. 

See

“Sensor (input) early jam 

service check” on 

page 2-127

.

200.06

Sensor (input) early 
jam

The sensor (input) rebounded 
once the trailing edge of the 
media passed.

Go to sensor (input) service 
check.

See

“Sensor (input) service 

check” on page 2-120

.

200.07

Sensor (input) late 
jam

Source = input option 
tray

The media is late reaching the 
sensor (input) within the 
specified time.

Go to sensor (input) late jam 
service check. 

See

“Sensor (input) late jam 

service check.” on 

page 2-123

.

200.08

Sensor (input) early 
jam

The media reaches the sensor 
(input) sooner than the 
specified time.

1. Fan the media and ensure it 
is properly installed.

2. Go to sensor (input) early 
jam service check. 

See

“Sensor (input) early jam 

service check” on 

page 2-127

.

Summary of Contents for 5230DN











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands