Dell 5230DN, Service Manual

Page: 212 / 586

3-6
Service Manual
The print registration range is:
5. Continue changing the settings by repeating steps 2 through 4.
6. Print another copy of the Quick Test to verify your changes.
7. To exit REGISTRATION, press Back .
Quick Test
The Quick Test contains the following information:
•
Device information
•
Current page count, installed memory
•
Processor speed
•
Serial number
•
Engine ID
•
System card ID
•
Printer revision levels
•
Printer margin settings
•
Alignment diamonds at the top and bottom
•
Horizontal lines to check for skew
To print the Quick Test page:
Note: Print the Quick Test Page on letter or A4 paper.
1.
Select
REGISTRATION
from DIAGNOSTICS.
2.
Press until the appears next to
Quick Test
.
The message
Quick Test Printing…
appears on the display.
Once the Quick Test Page completes printing, the Registration screen displays again.
Variable Description Value Direction of change
T= Top margin -25 to +25 Each increment causes
approximately 4 pels shift (at 600
dpi). A positive change moves the image
down the page and increases the
top margin. A negative change
moves the image up and decreases
the top margin.
B= Bottom margin -20 to +20 Each increment causes
approximately 0.55 mm shift in the
bottom margin. A positive change compresses the
image so it appears to move down
the page and a negative change
moves the image up.
L= Left margin -25 to +25 A positive change moves the image
to the right, and a negative change
moves the image to the left. No
compression occurs.
R= Right margin - 99 to +99 A positive change moves the image
to the right, and a negative change
moves the image to the left.