Dell 5230DN Service Manual Download

Page: 177 / 586

Diagnostic information

2-143

Sensor (stapler pass through) static jam service check

Sensor (output pass through) late jam service check

Check the above sensor for proper connection.

Is the above sensor connected properly?

Replace the
stapler unit
assembly.

Go to

“SFP

stapler assembly

stapler unit

assembly

removal” on

page 4-183

Replace the
connection.

Perform a print test using the output option.

Does the error continue?

Replace the output
option.

Problem solved.

Step

Check

Yes

Check the media path for partially fed or jammed media.

Is the media path free from partially fed or jammed media?

Go to step 2.

Remove any pre-
staged or jammed
media.

Check the sensor (stapler pass through) for proper
operation.

1. Enter the diagnostic mode

2. Select Finisher sensor test

3. Select Sensor test

4. Select pass & media

5. Observe the line item “passthru”

Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked.

Go to step 4.

Go to step 3.

Check the above sensor for proper connection.

Is the above sensor connected properly?

Replace the
stapler unit
assembly.

Go to

“SFP

stapler assembly

stapler unit

assembly

removal” on

page 4-183

Replace the
connection.

Perform a print test using the output option.

Does the error continue?

Replace the output
option.

Problem solved.

Step

Check

Yes

Check the output option for proper installation.

Is the above component properly installed?

Go to step 2.

Remove then
reinstall the output
option

Step

Check

Yes

Summary of Contents for 5230DN











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5230DN

Reviews:

Related manuals for 5230DN

Brands by name

Popular brands

Dell 5230DN, Service Manual

Search results

Summary of Contents for 5230DN

Reviews:

Related manuals for 5230DN

Brands by name

Popular brands