Dell 5230DN Service Manual Download

Page: 356 / 586

4-38

Service Manual

MPF pick solenoid assembly removal

Note:

The MPF lift plate assembly can be detached and allowed to hang by the harness. The connection does

not need to be disconnected.

1. Remove the MPF lift plate assembly. Go to

“MPF lift plate assembly removal” on page 4-36

2. Remove the side cover, left. Go to

“MPF cam gear removal” on page 4-36

“Side cover, left removal

3. Remove the six screws (A) securing the metal cover to the machine.

4. Remove the metal cover.

(5350dn, 5530dn, and T656)” on page 4-67

Summary of Contents for 5230DN











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5230DN

Reviews:

Related manuals for 5230DN

Brands by name

Popular brands

Dell 5230DN, Service Manual

Search results

Summary of Contents for 5230DN

Reviews:

Related manuals for 5230DN

Brands by name

Popular brands