Dell 5230DN Service Manual Download

Page: 102 / 586

2-68

Service Manual

27x.15

x = bin
number

Sensor (output pass
through) static jam

Applies to:

High capacity stacker

Mailbox

Offset stacker

Output expander

Sensor (mailbox
empty) static jam

Applies to:

Mailbox

Media remains on the sensor
(output pass through) during
the warm up sequence.

Media remains on the sensor
(mailbox empty) during the
warm up sequence.

See

“Sensor (output pass

through) static jam service

check” on page 2-145

See

“Sensor (mailbox empty)

static jam service check” on

page 2-147

27x.29

x = bin
number

Sensor (output pass
through) lingering jam

Applies to:

Offset stacker

Mailbox

Output expander

High capacity stacker

The media reached the sensor
(output pass through) but did
not clear it in the specified time.

See

“Sensor (output pass

through) lingering jam

service check” on

page 2-144

27x.50

x = bin
number

Sensor (output pass
through) lingering jam

Applies to:

Mailbox

The media reached the sensor
(output pass through) but did
not clear it in the specified time.

See

“Sensor (output pass

through) lingering jam

service check” on

page 2-144

27x.50

x = bin
number

Left tamper does not
leave home position
failure

Applies to:

Offset stacker

The sensor (left tamper HP)
does not detect that the tamper
has moved from home position.

1. Check all the connections on
the output option controller
card.

2. Check the tamper drive belt
for damage and replace if
needed.

3. Replace the left tamper
motor assembly.

Go to

“SFP stapler assembly

tamper drive motor

assembly removal” on

page 4-181

4. Replace the sensor (tamper
HP).

Go to

“SFP stapler assembly

sensor (tamper HP left and

right) removal” on

page 4-188

4. Replace the output option if
problem remains.

27x.51

x = bin
number

Sensor (output pass
through) late jam

Applies to:

Mailbox

The media is late reaching the
sensor (output pass through)

See

“Sensor (output pass

through) late jam service

Error

code or

message

Error contents

Description/Action

Possible repair actions

within the specified time.

check” on page 2-143

Summary of Contents for 5230DN











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5230DN

Reviews:

Related manuals for 5230DN

Brands by name

Popular brands

Dell 5230DN, Service Manual

Search results

Summary of Contents for 5230DN

Reviews:

Related manuals for 5230DN

Brands by name

Popular brands