Dell 5230DN Service Manual Download

Page: 56 / 586

2-22

Service Manual

201.57

Sensor (fuser output)
late jam

Type 1 fuser

Fuser page count has
exceeded life

The media is late reaching the
sensor (fuser output) within the
specified time.

Go to sensor (fuser output) late
jam service check.

See

“Sensor (fuser output)

late jam service check.” on

page 2-129

201.75

Sensor (fuser output)
late jam

Type 2 fuser

Fuser page count has
exceeded life.

The media is late reaching the
sensor (fuser output) within the
specified time.

Go to sensor (fuser output) late
jam service check.

See

“Sensor (fuser output)

late jam service check.” on

page 2-129

201.76

Main drive motor
assembly load error.

Type 2 fuser

Fuser page count has
exceeded life.

The main drive motor assembly
has failed or caused high
mechanical load due to paper
jam or bind.

1. Remove all media present

in media path.

2. Check all connections on

the main drive motor
assembly.

3. Check all connections on

the system card assembly.

4. Replace the main drive

motor assembly if problem
remains. Go to

“Output

cover assembly removal”

on page 4-54

201.77

Sensor (fuser output)
late jam

Type 2 fuser

Fuser page count has
exceeded life.

The media is late reaching the
sensor (fuser output) within the
specified time.

Go to sensor (fuser output) late
jam service check.

See

“Sensor (fuser output)

late jam service check.” on

page 2-129

201.78

Image data did not
start in time

Type 2 fuser

Fuser page count has
exceeded life

Printhead write failure

1. Check all connections on the
printhead assembly

2. Check all connections on the
system card assembly.

3. Replace the printhead
assembly if problem remains.

4. Replace the system card
assembly if problem remains.
Go to

“System card

assembly removal” on

page 4-76

201.79

Sensor (narrow
media) late jam

Type 2 fuser

Fuser page count has
exceeded life

The media is late reaching the
sensor (narrow media) within
the specified time.

Go to sensor (narrow media)
late jam service check.

See

“Sensor (narrow media)

late jam service check.” on

page 2-133

Error

code or

message

Error contents

Description/Action

Possible repair actions

Summary of Contents for 5230DN











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5230DN

Reviews:

Related manuals for 5230DN

Brands by name

Popular brands

Dell 5230DN, Service Manual

Search results

Summary of Contents for 5230DN

Reviews:

Related manuals for 5230DN

Brands by name

Popular brands