Dell 5230DN Service Manual Download | Manualshive

Page: 45 / 586

background image

Diagnostic information

2-11

58

Too Many Disks
Installed

This error code displays when
too many disks are attached to
the printer.

1. Turn off and unplug the

printer.

2. Remove the excess disks.
3. Plug in the printer, and turn

it on.

58

Too Many Flash
Options

This error code displays when
too many user flash memory
options or too many optional
firmware cards have been
installed.

User can power off and remove
extra flash options.

1. Turn off and unplug the

printer.

2. Remove the excess flash

memory.

3. Plug in the printer, and turn

it on.

58

Too Many Trays
Attached

This error code displays when
too many input trays are
attached to the printer.

Note:

With the RFID option

attached, the maximum
number of trays is three.
Without the RFID option
attached, the maximum
number is four.

1. Turn off and unplug the

printer.

2. Remove the excess trays.
3. Plug in the printer, and turn

it on.

59

Incompatible Duplex

An incompatible duplex option
is installed.

Remove the incompatible

duplex option and press

to clear the message.

Note:

If the user installed the

incompatible device to satisfy a
Check Device Connections/
reattach message, the user
should reinstall an associated
compatible option or hot unplug
the option.

1. Turn off and unplug the

printer.

2. Remove the incompatible

external duplex unit
assembly.

3. Plug in the printer, and turn

it on.

59

Incompatible
Envelope Feeder

An incompatible envelope
feeder is installed.

Remove the incompatible

feeder and press

to clear

the message.

Note:

If the user installed the

incompatible device to satisfy a
Check Device Connections/
reattach message, the user
should reinstall an associated
compatible option or hot unplug
the option.

1. Turn off and unplug the

printer.

2. Remove the incompatible

envelope feeder.

3. Plug in the printer, and turn

it on.

Error

code or

message

Error contents

Description/Action

Possible repair actions

«
...
43
44
45
46
47
...
»

Summary of Contents for 5230DN











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 5230DN

Brand: Xerox Pages: 23

Brand: IBM Pages: 113

Brand: IBM Pages: 16

Brand: IBM Pages: 214

Brand: Oki Pages: 152

Brand: Oki Pages: 140

Brand: Oki Pages: 181

Brand: Oki Pages: 52

Brand: Oki Pages: 229

Brand: Oki Pages: 224

Brand: Oki Pages: 141

Brand: Oki Pages: 160

Brand: Oki Pages: 48

Brand: Oki Pages: 2

Brand: Oki Pages: 20

Brand: Oki Pages: 52

Brand: Oki Pages: 127

Brand: Oki Pages: 128

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands