Dell 5230DN Service Manual Download

Page: 344 / 586

4-26

Service Manual

Laser cover removal

1. Remove the output cover assembly. Go to

“Output cover assembly removal” on page 4-54

2. Remove the fuser wiper cover assembly. Go to

“Fuser wiper cover assembly removal” on page 4-23

3. Remove the side cover, left. Go to

“MPF cam gear removal” on page 4-36

“Side cover, left removal

5. Remove the five screws (A) securing the laser cover to the machine.

WARNING:

When removing the laser cover, ensure that the standard bin actuator assembly does not become

damaged.

4. Remove the side cover, right. Go to

“Side cover, right removal (5230n/dn)” on page 4-67

“Side cover, right removal (5350dn, 5530dn, and T656)” on page 4-68

(5350dn, 5530dn, and T656)” on page 4-67

Summary of Contents for 5230DN











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5230DN

Reviews:

Related manuals for 5230DN

Brands by name

Popular brands

Dell 5230DN, Service Manual

Search results

Summary of Contents for 5230DN

Reviews:

Related manuals for 5230DN

Brands by name

Popular brands