Dell 5230DN Service Manual Download Page 52

Page: 52 / 586

2-18

Service Manual

200.39

Sensor (input)
lingering jam

Source = Tray 3
Tray level = Empty

The media reached the sensor
(input) but did not clear it within
the specified time.

Go to sensor (input) lingering
jam service check.

See

“Sensor (input) lingering

jam service check.” on

page 2-126

200.47

Sensor (input)
lingering jam

Source = Tray 4
Tray level = Not Low

The media reached the sensor
(input) but did not clear it within
the specified time.

Go to sensor (input) lingering
jam service check.

See

“Sensor (input) lingering

jam service check.” on

page 2-126

200.48

Sensor (input)
lingering jam

Source = Tray 4
Tray level = Low

The media reached the sensor
(input) but did not clear it within
the specified time.

Go to sensor (input) lingering
jam service check.

See

“Sensor (input) lingering

jam service check.” on

page 2-126

200.49

Sensor (input)
lingering jam

Source = Tray 4
Tray level = Empty

The media reached the sensor
(input) but did not clear it within
the specified time.

Go to sensor (input) lingering
jam service check.

See

“Sensor (input) lingering

jam service check.” on

page 2-126

200.57

Sensor (input)
lingering jam

Source = Tray 5
Tray level = Not Low

The media reached the sensor
(input) but did not clear it within
the specified time.

Go to sensor (input) lingering
jam service check.

See

“Sensor (input) lingering

jam service check.” on

page 2-126

200.58

Sensor (input)
lingering jam

Source = Tray 5
Tray level = Low

The media reached the sensor
(input) but did not clear it within
the specified time.

Go to sensor (input) lingering
jam service check.

See

“Sensor (input) lingering

jam service check.” on

page 2-126

200.59

Sensor (input)
lingering jam

Source = Tray 5
Tray level = Empty

The media reached the sensor
(input) but did not clear it within
the specified time.

Go to sensor (input) lingering
jam service check.

See

“Sensor (input) lingering

jam service check.” on

page 2-126

201.00

Sensor (fuser output)
area jam.

Type 1 fuser

The media is jammed in the
sensor (fuser output) area.

Go to sensor (fuser output)
service check.

See

“Sensor (fuser output)

service check” on

page 2-120

201.01

Main drive motor
assembly load error.

Type 1 fuser

The main drive motor assembly
has failed or caused high
mechanical load due to paper
jam or bind.

1. Check all connections on

the main drive motor
assembly.

2. Check all connections on

the system card assembly.

3. Replace the main drive

motor assembly if problem
remains. Go to

“Output

cover assembly removal”

on page 4-54

Error

code or

message

Error contents

Description/Action

Possible repair actions

Summary of Contents for 5230DN











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5230DN

Reviews:

Related manuals for 5230DN

Brands by name

Popular brands

Dell 5230DN, Service Manual

Search results

Summary of Contents for 5230DN

Reviews:

Related manuals for 5230DN

Brands by name

Popular brands