Dell 5230DN Service Manual Download

Page: 63 / 586

Diagnostic information

2-29

202.78

Sensor (narrow
media) static jam

Type 2 fuser

Fuser page count has
exceeded life.

Media remains on the sensor
(narrow media) during the
warm up sequence.

1. Go to sensor (fuser output)

static jam service check.
See

“Sensor (fuser

output) static jam service

check” on page 2-132

2. Go to sensor (narrow

media) static jam service
check. See

“Sensor

(narrow media) static jam

service check” on

page 2-134

202.79

Sensor (fuser output)
bounce

Type 2 fuser

Fuser page count has
exceeded life.

The sensor (fuser output)
rebounded once the trailing
edge of the media passed.

Go to sensor (fuser output)
service check.

See

“Sensor (fuser output)

service check” on

page 2-120

202.81

Sensor (fuser output)
static jam

Type 2 fuser

Fuser page count has
exceeded life.

Media remains on the sensor
(fuser output) during the warm
up sequence.

Go to sensor (fuser output)
static jam service check.

See

“Sensor (fuser output)

static jam service check” on

page 2-132

202.82

Sensor (fuser output)
lingering jam.

Type 2 fuser

Fuser page count has
exceeded life.

Media reached the sensor
(fuser output) but did not clear
it in the specified time.

Go to sensor (fuser output)
lingering jam service check.

See

“Sensor (fuser output)

lingering jam service check.”

on page 2-131

202.84

Sensor (fuser output)
lingering jam.

Type 2 fuser

Fuser page count has
exceeded life.

Media reached the sensor
(fuser output) but did not clear
it in the specified time.

Go to sensor (fuser output)
lingering jam service check.

See

“Sensor (fuser output)

lingering jam service check.”

on page 2-131

202.85

Sensor (fuser output)
lingering jam.

Destination is output
option.

Type 2 fuser

Fuser page count has
exceeded life.

Media reached the sensor
(fuser output) but did not clear
it in the specified time.

and

Media did not reach the sensor
(narrow media)

Go to sensor (fuser output)
lingering jam service check.

See

“Sensor (fuser output)

lingering jam service check.”

on page 2-131

202.86

Sensor (fuser output)
lingering jam.

Destination is
standard bin.

Type 2 fuser

Fuser page count has
exceeded life.

Media reached the sensor
(fuser output) but did not clear
it in the specified time.

and

Media did reach the sensor
(narrow media)

Go to sensor (fuser output)
lingering jam service check.

See

“Sensor (fuser output)

lingering jam service check.”

on page 2-131

Error

code or

message

Error contents

Description/Action

Possible repair actions

Summary of Contents for 5230DN











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5230DN

Reviews:

Related manuals for 5230DN

Brands by name

Popular brands

Dell 5230DN, Service Manual

Search results

Summary of Contents for 5230DN

Reviews:

Related manuals for 5230DN

Brands by name

Popular brands