Dell 2350 - Wireless WLAN Broadband Router User Manual Download Page 182

Page: 182 / 211

Wireless Settings

Network Name (SSID)

The SSID is a unique network name. It is used to identify the WLAN. This name is used when connecting additional
computers to your wireless router.

Channel

This is the radio channel over which a communication transmission occurs.

Default Settings

Resets the Dell Wireless 2350 Broadband Router to its factory defaults.

Apply

Saves current settings.

Restore

Restores previous settings.

Your router has an advanced security mechanism. It ensures the confidentiality of data, and also guards data against being
modified. If you want to enable the security mechanism, click to select

Enable Wireless Security

. You will then be able to

choose whether you wish to use WEP or WPA security mechanisms.

Wireless Settings WEP

Summary of Contents for 2350 - Wireless WLAN Broadband Router




















































































































































































































Search results

Summary of Contents for 2350 - Wireless WLAN Broadband Router

Reviews:

Related manuals for 2350 - Wireless WLAN Broadband Router

Brands by name

Popular brands

Dell 2350 - Wireless WLAN Broadband Router, User Manual

Search results

Summary of Contents for 2350 - Wireless WLAN Broadband Router

Reviews:

Related manuals for 2350 - Wireless WLAN Broadband Router

Brands by name

Popular brands