Dell 2350 - Wireless WLAN Broadband Router, User Manual

Page: 164 / 211

To enable access control in the router, perform the following steps:
1. Click to select Enable MAC Access Control .
2. Click the Add button, a pop-up window will open and then enter the MAC address of the network card on the computer on which you allow the access to the
router.
3. Click Submit to enter the rule to the router.
4. To remove an existing rule, click to select edit beside MAC address .
5. A pop-up window will open and click the Delete button to remove it.
NOTE: The Access Control Settings apply to wireless client computers and not to wired client computers.
Back to Top
Port Forwarding Settings
Port Forwarding Settings