Dell 2350 - Wireless WLAN Broadband Router, User Manual

Page: 15 / 211

Dell Wireless 2350 Broadband Router will allocated IP addresses to any connect computer automatically.
·
Default user name and password is admin . Use this to access the Configuration Settings on the Dell Wireless 2350
Broadband Router when you browse to http://my.router
This configuration will work properly with a DSL provider that does not require authentication.
Back to Top
DSL with PPPoE
1. Connect the Ethernet port on the cable modem to the Internet port on the Dell Wireless 2350 Broadband Router through an
Ethernet cable.
2. Connect any one of the four LAN ports on the Dell Wireless 2350 Broadband Router to the Ethernet port on your computer
through another Ethernet cable.
3. Turn on the Dell Wireless 2350 Broadband Router.
4. Open your web browser (for example Internet Explorer) and go to http://my.router , or the default IP address http://192.168.2.1 .
5. Enter the default username and password admin when prompted to do so.
6. Go to the Basic Settings menu option tab on the top navigation bar and wait for the menu to appear.
7. Click the Internet Connection Settings menu option on the pull down menu.
8. Select Connection Type from the drop down menu and select DSL(PPPoE) .
9. Type the user name provided to you by your ISP in the User Name box.
10. Type your password in the Password and Retype Password boxes.
11. If your ISP requires you to provide a MAC address, click to check the Your ISP requires you to input WAN Ethernet Mac
box.
11. Type the address in the appropriate box.
12. Click the Next button.
13. Click the Save & Restart button.
14. When your web browser returns to the main page of the network, the Dell Wireless 2350 Broadband Router will have
successfully restarted with the new settings.
Back to Top
Back to Contents Page