Dell 2350 - Wireless WLAN Broadband Router User Manual Download

Page: 173 / 211

Time

Based on the timestamp of the IP packet, plus or minus the time offset

Event

Type of attack that the router detects

Event Type

Type of attack that the router detects

Details

Details about the detected attack

The system can alert you via e-mail to any attempted intrusion.

Click to select

Email Alert Enable

Type the e-mail address that you want the alert sent to in the

Email Address

field.

Click the

Submit

button.

Internet Activity Log

Summary of Contents for 2350 - Wireless WLAN Broadband Router




















































































































































































































Search results

Summary of Contents for 2350 - Wireless WLAN Broadband Router

Reviews:

Related manuals for 2350 - Wireless WLAN Broadband Router

Brands by name

Popular brands

Dell 2350 - Wireless WLAN Broadband Router, User Manual

Search results

Summary of Contents for 2350 - Wireless WLAN Broadband Router

Reviews:

Related manuals for 2350 - Wireless WLAN Broadband Router

Brands by name

Popular brands