Dell 2350 - Wireless WLAN Broadband Router User Manual Download Page 128

Page: 128 / 211

Your CD should automatically launch the Setup Wizard. If it does not, complete the following steps to start the Wizard.

Click the

Start

button, and then click

Run

Type the following text in the

Open:

field:

:\setup.exe

where

is the drive letter of your CD drive.

Once the Setup Wizard has been launched, you will be guided through a series of windows. These windows are illustrated
below along with an explanation on their functionalities.

Setup Wizard Screens

Welcome Menu

This menu offers several options to select from.

Router Installation

Begin installing your router and configure it to connect to the Internet.

Connect Additional Computer

Configure a computer to connect to the Dell Wireless 2350 Broadband Router.

Install Control Utility

Install the Control Utility on a computer

User's Guide

View the user's guide (this document)

Exit

End the Setup Wizard

Welcome

Summary of Contents for 2350 - Wireless WLAN Broadband Router




















































































































































































































Search results

Summary of Contents for 2350 - Wireless WLAN Broadband Router

Reviews:

Related manuals for 2350 - Wireless WLAN Broadband Router

Brands by name

Popular brands

Dell 2350 - Wireless WLAN Broadband Router, User Manual

Search results

Summary of Contents for 2350 - Wireless WLAN Broadband Router

Reviews:

Related manuals for 2350 - Wireless WLAN Broadband Router

Brands by name

Popular brands