Dell 2350 - Wireless WLAN Broadband Router User Manual Download Page 98 | Manualshive

Page: 98 / 211

background image

How To Setup Microsoft Windows XP Clients with Service Pack 2 to Connect To
The Router

Configuring Automatic Network Connections

Dell recommends using the Setup Wizard that is located on the Dell Wireless 2350 Broadband Router CD that cam with your
device.

To run the Setup Wizard, perform the following steps:

1.

Insert the

Dell Wireless 2350 Broadband Router Setup CD

into the CD drive onto the computer you wish to connect

wirelessly to the Dell Wireless 2350 Broadband Router.
Your CD should automatically launch the Setup Wizard. If it does not, complete the following steps to start the Wizard.

a.

Click the

Start

button, and then click

Run

.

b.

Type the following text in the

Open:

field:

X

:\setup.exe

where

X

is the drive letter of your CD drive.

Once the Setup Wizard has been launched, select the

"Connect Wireless Computer"

option and follow the on screen

instructions.

NOTE:

If the network encryption key on your wireless client does not match the key set on your Dell Wireless 2350 Broadband
Router, your computer will fail to connect to the network.

Back to Top

Back to Contents Page

«
...
96
97
98
99
100
...
»

Summary of Contents for 2350 - Wireless WLAN Broadband Router




















































































































































































































Reviews:

No comments

Related manuals for 2350 - Wireless WLAN Broadband Router

Brand: IBM Pages: 158

Brand: Sinclair Pages: 65

Brand: Radio Shack Pages: 408

Aqua Compact Pro

Brand: DIGITAL YACHT Pages: 5

Brand: Steinberg Pages: 820

5694 - GT - 4 GB RAM

Brand: Gateway Pages: 126

Brand: Amiga Pages: 113

Brand: Uplift Desk Pages: 2

Brand: Vivo Pages: 8

Brand: Acorn Pages: 114

GX520 - OptiPlex - 512 MB RAM

Brand: Dell Pages: 266

Brand: Dell Pages: 74

Brand: Fujitsu Siemens Computers Pages: 2

Brand: Fujitsu Siemens Computers Pages: 5

DA-682A-DPP Series

Brand: Moxa Technologies Pages: 7

Brand: FabiaTech Pages: 3

Brand: FabiaTech Pages: 4

Brand: Ergotron Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands