Dell 2350 - Wireless WLAN Broadband Router User Manual Download

Page: 185 / 211

Add

This adds a new Parental Control entry to the list.

Edit

Allows you to edit any current entry.

Delete

Deletes am entry from the Parental Control list..

Delete All

Deletes all records from the Parental Control list.

Restore

Restores previous settings.

Network Access Control

Parental Control

Parental Control allows you to determine what type of websites are accessible through your wireless network. It also allows you
to specify what time of day the Internet can be accessed.

To enable parental control, perform the following steps:

1. Click the

Add

button. The

Parental Control

window appears.

2. Enter the IP address of the computer you want to control (for example, your child's computer).

3. Select

Allow

Deny

from the

Internet Access

list.

4. Select a time interval by choosing a start time in the

From

list and an end time in the

list.

Summary of Contents for 2350 - Wireless WLAN Broadband Router




















































































































































































































Search results

Summary of Contents for 2350 - Wireless WLAN Broadband Router

Reviews:

Related manuals for 2350 - Wireless WLAN Broadband Router

Brands by name

Popular brands

Dell 2350 - Wireless WLAN Broadband Router, User Manual

Search results

Summary of Contents for 2350 - Wireless WLAN Broadband Router

Reviews:

Related manuals for 2350 - Wireless WLAN Broadband Router

Brands by name

Popular brands