5.
Press
Cancel
(
) to return to the Standby mode.
6.
Selecting Country
To change the country that appears on the operator panel, follow these steps:
Press
Scroll
( or ) to highlight
Setup
and then press
Select
(
).
1.
Press
Scroll
(
or
) to highlight
Machine Setup
and then press
Select
(
).
2.
Press
Scroll
(
or
) to highlight
Select Country
and then press
Select
(
).
3.
Press
Scroll
(
or
) to display the country you want and then press
Select
(
).
4.
Press
Cancel
(
) to return to the Standby mode.
5.
Power Save Mode
The Power Save mode enables your printer to reduce power consumption when it is not in actual use. You
can enable this mode by selecting the duration for which the printer waits after a job is printed before it
switches to a reduced power state.
Press
Scroll
( or ) to highlight
Setup
and then press
Select
(
).
1.
Press
Scroll
(
or
) to highlight
Machine Setup
and then press
Select
(
).
2.
Press
Scroll
(
or
) to highlight
Print Power Save
and press
Select
(
).
3.
Press
Scroll
(
or
) to display the time settings you want.
4.
The available options are 5, 10, 15, 30, 60 and 120 (minutes).
The factory default setting is 30 minutes.
Press
Select
(
) to save the selection.
5.
Press
Cancel
(
) to return to the Standby mode.
6.
Summary of Contents for 2335 Mono Laser
