manualshive.com logo in svg

DAS DL-300E, Installation Manual, Page: 54 / 57

Share
Download
DAS DL-300E Installation Manual Download Page 54

54

SPECIFICATIONS

OPERATING POWER

16.5 VAC 50 VA Transformer

AUXILIARY POWER

12 V DC Regulated 1 AMP

LOOP RESISTANCE

300 Ohms Maximum

BUILT-IN SIREN DRIVER

2-tone (Steady and Yelp)

LOOP RESPONSE

Selected to 500ms

OPERATING TEMPERATURE

32 to 120 degrees F

CODE PAD DIMENSIONS

6.45” Wide
4.12” High
.850” Deep

METAL ENCLOSURE DIMENSION

11.25” Wide
16.25” High
3.50” Deep

SHIPPING WEIGHT

12 lbs 

WARRANTY STATEMENT

DIRECT ALARM SUPPLIES GUARANTEES THIS PRODUCT AGAINST

DEFECTIVE PARTS AND WORKMANSHIP FOR TWENTY-FOUR (24) MONTHS

FROM DATE OF PURCHASE. IF ANY DEFECT APPEARS DU AINGTHE

WARRANTY PERIOD, RETURN IT TO DAS, POSTAGE PREPAID. THE UNIT

WILL BE REPAIRED AND RETURNED. DAS ASSUMES NO LIABILITY FOR

CONSEQUENTIAL OR INDIRECT DAMAGE AND ACCEPTS NO RESPONSIBILITY

FOR REPAIRING DAMAGE TO THE PRODUCT CAUSED BY MISUSE, CARELESS

HANDLING, OR WHERE REPAIRS HAVE BEEN MADE BY OTHERS.

NO OTHER GUARANTEE, WRITTEN OR VERBAL, IS AUTHORIZED BY OR

ON BEHALF OF DIRECT ALARM SUPPLIES, 9 NOW ILL STREET

CONDELL PARK NSW.

DIRECT ALARM SUPPLIES

9 NOWILL STREET, CONDELL PARK

NSW 2200 AUSTRALIA

PHONE (02) 9707 4311

FAX      (02)

   

790 3424

DL300E INSTALLATION MANUAL
 DL300EID97 REV D (6-26•97)

Summary of Contents for DL-300E


























































Reviews:

No comments