manualshive.com logo in svg

DAS DL-300E, Installation Manual, Page: 2 / 57

Share
Download
DAS DL-300E Installation Manual Download Page 2

2

 Standard Parts List

DL-300E

INSTALLATION

MANUAL

General

Description

The DAS DL-300E is a versatile 16 expandable to 32 zone up/downloadable security control with a built-in digital communicator. Its
microcomputer design gives some of the most versatile, yet easy to use features available for most security applications today.

Some of the features of the DL-300E include; Paritionable up to four separate systems, dual reporting, Partial Mode (for at home

monitoring), 30 user codes, internal log, time restriction options for user codes, dynamic battery test, domestic dialing format, plus
many more. Each of the 32 zones can be programmed to be one of nine different types including 24 Hour, Handover, Day Zone,

and secondary entry. The system can be used with LCD or LED code pads, keyswitches, or radio remote arming. Each zone is

individually annunciated and can be isolated from the code pad if so enabled. See page 14 for a description of all zone types. Read

the OPERATOR'S MANUAL before you begin the installation for the best overall description of how the DL-300E functions. After
installation of the security system, complete the information on page 1 of the operator's manual and explain the system operation to

all security system owners/operators.

QUANTITY

PARTS DESCRIPTION

PART #

1

MASTER CONTROL PANEL W/O CODE PAD

FS4533

20

3K3 ½ WATT EOL RESISTORS

EOL-33

1

(4) WIRE LEAD FOR AUX OUTPUTS

8920

1

INSTALLATION MANUAL

IM-DL-300E

1

OPERATORS MANUAL

OM-DL-300E

OPTIONAL PARTS DESCRIPTION

PART #

16 LED REMOTE CODE PAD

FS4531

LCD ALPHA NUMERIC DISPLAY CODE PAD

FS4534

AC POWER SUPPLY 16.5V 3 AMP PLUG PACK

FS4426

SMART PROGRAMMER WITH LCD DISPLAY

FS461 0

PROGRAMMER WITH DIGITAL NUMERIC DISPLAY

FS4597

8 WAY RELAY OUTPUT MODULE

FS4634

16 WAY VOLTAGE OUTPUT MODULE

FS4614

16 WAY X-10 VOLTAGE OUTPUT MODULE

FS4804

12 VOLT 6.5 AMP HOUR BATTERY

FS4312

       Optional 

Parts 

List

The following parts are available for use with the DL300E.

Summary of Contents for DL-300E


























































Reviews:

No comments