manualshive.com logo in svg

DAS DL-300E, Installation Manual, Page: 26 / 57

Share
Download
DAS DL-300E Installation Manual Download Page 26

26

Location 268-271: Programming the Communicator Code for Zone 4

Locations 268-271 are used to control the communicator code for zone 4. Zone 4 is automatically enabled and when
contact ~""' I.D is selected the default report is event "130 - Burglary" with point "04" when in alarm. Refer to appendix 1 ff a
different event 

4  

type is required. The defaults are "3:0:4:5" with telephone number 1 and the event log enabled.

Location 272-275: Programming the Communicator Code for Zone 5

Locations 272-275 are used to control the communicator code for zone 5. Zone 5 is automatically enabled and when
contact 

ID 

is selected the default report is event "130 - Burglary" with point "05" when in alarm. Refer to appendix 1 if a

different event type is required. The defaults are "3:0:5:5" with telephone number 1 and the event log enabled.

Location 276-279: Programming the Communicator Code for Zone 6

Locations 276-279 are used to control the communicator code for zone 6. Zone 6 is automatically enabled and when
contact 

ID 

is selected the default report is event "130 - Burglary" with point "06" when in alarm. Refer to appendix 1 if a

different event type is required. The defaults are "3:0:6:5" with telephone number 1 and the event log enabled.

Location 280-283: Programming the Communicator Code for Zone 7

Locations 280-283 are used to control the communicator code for zone 7. Zone 7 is automatically enabled and when
contact 

ID 

is selected the default report is event "130 - Burglary" with point "07" when in alarm. Refer to appendix 1 if a

different event type is required. The defaults are "3:0:7:5" with telephone number 1 and the event log enabled.

Location 284-287: Programming the Communicator Code for Zone 8

Locations 284-287 are used to control the communicator code for zone 8. Zone 8 is automatically enabled and when
contact 

ID 

is selected the default report is event "130 - Burglary" with point "08" when in alarm. Refer to appendix 1 if a

different event type is required. The defaults are "3:0:8:5" with telephone number 1 and the event log enabled.

Location 288-291: Programming the Communicator Code for Zone
9

Locations 288-291 are used to control the communicator code for zone 9. Zone 9 is automatically enabled and when
contact 

ID 

is selected the default report is event "130 - Burglary" with point "09" when in alarm. Refer to appendix 1 if a

different event type is required. The defaults are "3:0:9:5" with telephone number 1 and the event log enabled.

Location 292-295: Programming the Communicator Code for Zone 10

Locations 292-295 are used to control the communicator code for zone 10. Zone 10 is automatically enabled and when
contact I.D is selected the default report is event "130 - Burglary" with point "10" when in alarm. Refer to appendix 1 if a
different event type is required. The defaults are "3:1:0:5" with telephone number 1 and the event log enabled.

Location 296-299: Programming the Communicator Code for Zone
11

Locations 296-299 are used to control the communicator code for zone 11. Zone 11 is automatically enabled and when
contact I.D is selected the default report is event "130 - Burglary" with point "11" when in alarm. Refer to appendix 1 if a
different event type is required. The defaults are "3:1:1:5" with telephone number 1 and the event log enabled.

Summary of Contents for DL-300E


























































Reviews:

No comments