12
Location 124-127: Account Code Three For Partition #3
Locations 124-127 are utilized to assign an account code for partition #3 if a unique code is desired. If these locations contain "0",
the account code listed in locations 96-100 will be used. If a 3 digit code is used, program a "0" in location 127. If location 132
contains a "0", this account code is disabled.
Location 128-131: Account Code Four For Partition #4
Locations 128-131 are utilized to assign an account code for partition #4 if a unique code is desired. If these locations contain a "0",
the account code listed in locations 96-100 will be used. If a 3 digit code is used, program a "0" in location 131. If location 132
contains a "0", this account code is disabled.
Location 132: Communicator Dialling Sequence Options
The number programmed into this location determines the sequence and method the communicator will utilise when reporting an
event code. Use the table below to build the appropriate number. Add the number(s) associated with the desired features and
program the sum in this location. Factory default is "3 programming the characteristics for data 1 and data 2 (1 + 2 = "3")
DATA
DESCRIPTION
"1"
Alternates between phone number #1 and phone number #2 in increments of two (2)calls to each, until
the selected number of dial attempts has been made to each number.
"2"
The communicator attempts the number of dial attempts programmed into the number of dial attempts
location to phone number #1 and if unsuccessful, it will delay 5 minutes and attempt the same number
of dial attempts programmed into number of dial attempts to phone number #2.
"4"
Force the communicator to tie the account code to the phone number. If this feature is not selected the
account code will correspond to the partition. Select for split or dual reporting.
"8"
The communicator attempts the number of dial attempts programmed into the number of dial attempts
location to phone number #1 and if unsuccessful, tries the same number of dial attempts programmed
into number of dial attempts to phone number #2.
"0"
If a "0" is entered, the account code corresponds to the partition.
SPLIT REPORTING
: Split reporting is when one group of zone or system events report to a selected destination via the primary
phone number, primary account code and primary format. A second group of zone or system events report to a separate destination
via the second phone number, the second account code and the second format.
DUAL REPORTING
:
Dual reporting is when all zone or system events report to a selected destination via the primary phone number, primary account
code and primary format. The same events report to a separate destination via the second phone number, the second account code
and the second format.
NOTE: For most installations, default data "3" is required. Program a "4" for split or dual reporting.