2.8.7. 5-6* Pulse Outputs
Parameters for configuring the scaling and output functions of pulse outputs. The pulse outputs are designated to terminals 27 or 29. Select terminal 27
output in par. 5-01 and terminal 29 output in par. 5-02.
Options for readout output variables:
Parameters for configuring the scaling and output functions of pulse outputs. The pulse outputs are designated
to terminals 27 or 29. Select terminal 27 output in par. 5-01 and terminal 29 output in par. 5-02.
[0]
*
No operation
[45]
Bus control
[48]
Bus control time-out
[51]
MCO controlled
[100]
Output frequency
[101]
Reference
[102]
Feedback
[103]
Motor current
[104]
Torque relative to limit
[105]
Torque relative to rated
[106]
Power
[107]
Speed
[108]
Torque
[109]
Max Out Freq
5-60 Terminal 27 Pulse Output Variable
Option:
Function:
[0]
No operation
Select the variable for viewing on the terminal 27 display.
This parameter cannot be adjusted while the motor is running.
5-62 Pulse Output Maximum Frequency #27
Range:
Function:
5000 Hz
*
[0 - 32000 Hz]
Set the maximum frequency for terminal 27, corresponding to the output variable selected in par. 5-60.
This parameter cannot be adjusted while the motor is running.
5-63 Terminal 29 Pulse Output Variable
Option:
Function:
[0]
*
No operation
Select the variable for viewing on the terminal 29 display. This parameter is available for FC 302 only.
This parameter cannot be adjusted while the motor is running.
FC 300 Programming Guide
2. How to Programme
MG.33.M3.02 - VLT
®
is a registered Danfoss trademark
91
2