[1]
Voltage
16-62 Analog Input 53
Range:
Function:
0.000
*
[-20.000 - 20.000]
View the actual value at input 53.
16-63 Terminal 54 Switch Setting
View the setting of input terminal 54. Current = 0; Voltage = 1.
[0]
*
Current
[1]
Voltage
16-64 Analog Input 54
Range:
Function:
0.000
*
[-20.000 - 20.000]
View the actual value at input 54.
16-65 Analog Output 42 [mA]
Range:
Function:
0.000
*
[0.000 - 30.000]
View the actual value at output 42 in mA. The value shown reflects the selection in par. 06-50.
16-66 Digital Output [bin]
Range:
Function:
0
*
[0 - 115]
View the binary value of all digital outputs.
16-67 Freq. Input 29 [Hz]
Range:
Function:
0
*
[0 - 0]
View the actual frequency rate on terminal 29.
16-68 Freq. Input #33 [Hz]
Range:
Function:
0
*
[0 - 130000]
View the actual value of the frequency applied at terminal 33 as an impulse input.
16-69 Pulse Output #27 [Hz]
Range:
Function:
0
*
[0 - 40000]
View the actual value of pulses applied to terminal 27 in digital output mode.
16-70 Pulse Output #29 [Hz]
Range:
Function:
0
*
[0 - 40000]
View the actual value of pulses at terminal 29 in digital output mode.
This parameter is available for FC 302 only.
16-71 Relay Output [bin]
Range:
Function:
0
*
[0 - 31]
View the settings of all relays.
FC 300 Programming Guide
2. How to Programme
MG.33.M3.02 - VLT
®
is a registered Danfoss trademark
161
2