[9]
Multi set-up
Remote selection of set-ups using digital inputs and the serial communication port. This set-up uses the settings
from par. 0-12 'This option linked to'. Stop the frequency converter before making changes to open- and closed
loop functions
Use par. 0-51
Set-up copy
to copy a set-up to one or all other set-ups. Stop the frequency converter before switching between set-ups where parameters
marked ‘not changeable during operation’ have different values. To avoid conflicting settings of the same parameter within two different set-ups, link the
set-ups together using par. 0-12
This set-up linked to
. Parameters which are ‘not changeable during operation’ are marked FALSE in the parameter lists
in the section
Parameter Lists
.
0-11 Edit Set-up
Option:
Function:
Select the set-up to be edited (i.e. programmed) during operation; either the active set-up or one of the inactive
set-ups.
[0]
Factory setup
Cannot be edited but it is useful as a data source to return the other set-ups to a known state.
[1]
*
Set-up 1
Set-up 1
[1] to
Set-up 4
[4] can be edited freely during operation, independently of the active set-up.
[2]
Set-up 2
[3]
Set-up 3
[4]
Set-up 4
[9]
Active Set-up
Can also be edited during operation. Edit the chosen set-up from a range of sources: LCP, FC RS485, FC USB
or up to five fieldbus sites.
0-12 This Set-up Linked to
Option:
Function:
To enable conflict-free changes from one set-up to another during operation, link set-ups containing parameters
which are not changeable during operation. The link will ensure synchronising of the ‘not changeable during
operation’ parameter values when moving from one set-up to another during operation. ‘Not changeable during
operation’ parameters can be identified by the label FALSE in the parameter lists in the section
Parameter
Lists
.
2. How to Programme
FC 300 Programming Guide
28
MG.33.M3.02 - VLT
®
is a registered Danfoss trademark
2
