D-Link xStack DGS-3120 Series, Reference Manual

Page: 42 / 509

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
32
Management Admin Operator Power User User
Configuration Read/Write Read/Write–
partly Read/Write–
partly No
Network Monitoring Read/Write Read/Write Read-only Read-only
Community Strings and Trap
Stations Read/Write Read-only Read-only Read-only
Update Firmware and
Configuration Files Read/Write Read/Write No No
System Utilities Read/Write Read-only Read-only Read-only
Factory Reset Read/Write No No No
User Account Management
Add/Update/Delete User Accounts Read/Write No No No
View User Accounts Read/Write No No No
The fields that can be configured are described below:
Parameter Description
User Name
Enter a new user name for the Switch.
Password Enter a new password for the Switch.
Confirm Password Re-type in a new password for the Switch.
Access Right Specify the access right for this user.
Encryption Specify that encryption will be applied to this account. Option to choose from are Plain
Text , and SHA-1 .
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
NOTICE: In case of lost passwords or password corruption, please refer to the appendix chapter
entitled, “Password Recovery Procedure,” which will guide you through the steps necessary
to resolve this issue.
NOTE: The username and password should be less than 16 characters.
Command Logging Settings
This window is used to enable or disable the command logging settings.
To view this window, click System Configuration > Command Logging Settings , as shown below:
Figure 2-33 Command Logging Settings window
The fields that can be configured are described below: