xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
372
Figure 8-66 NetBIOS Filtering Settings window
The fields that can be configured are described below:
Parameter
Description
Unit
Select the unit you want to configure.
(EI and SI Mode Only)
NetBIOS Filtering Ports
Select the appropriate port to include in the NetBIOS filtering configuration.
Extensive NetBIOS
Filtering Ports
Select the appropriate port to include in the Extensive NetBIOS filtering
configuration. Extensive NetBIOS is NetBIOS over 802.3. The Switch will deny the
NetBIOS over 802.3 frame on these enabled ports.
Ports
Tick the appropriate ports to be configured.
Click the
Select All
button to select all ports in each individual section.
Click the
Clear All
button to deselect all ports in each individual section.
Click the
Apply
button to accept the changes made for each individual section.
Traffic Segmentation Settings
Traffic segmentation is used to limit traffic flow from a single or group of ports, to a group of ports. This method of
segmenting the flow of traffic is similar to using VLANs to limit traffic, but is more restrictive. It provides a method of
directing traffic that does not increase the overhead of the master switch CPU.
To view this window, click
Security > Traffic Segmentation Settings
as shown below:
Summary of Contents for xStack DGS-3120 Series
Page 1: ......
