manualshive.com logo in svg

D-Link xStack DGS-3120 Series, Reference Manual

The D-Link xStack DGS-3120 Series is a cutting-edge networking solution equipped with advanced features. Easily understand its capabilities and configuration options by downloading the comprehensive "Reference Manual". Find the free manual at manualshive.com and unlock the full potential of your D-Link xStack DGS-3120 Series with just a click.

Share
Download
background image

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide 

222 

 

 

Figure 5-94 IGMP Interface Settings – Edit window 

 

The fields that can be configured are described below: 

Parameter 

Description 

Version 

Use the drop-down menu to select the IGMP version that will be used to interpret IGMP 
queries on the interface. The default is 3. 

State 

Use the drop-down menu to enables or disables IGMP for the IP interface. The default 
is Disabled. 

Query Interval (1-
31744) 

Enter a value between 1 and 31744 seconds, with a default of 125 seconds. This 
specifies the length of time between sending IGMP queries. 

Max Response Time (1-
25) 

Enter a value between 1 and 25 to specify the maximum amount of time allowed before 
sending an IGMP response report. The default time is 10 seconds. 

Robustness Variable 
(1-7) 

A tuning variable to allow for subnetworks that are expected to lose a large number of 
packets. A value between 1 and 7 can be entered, with larger values being specified for 
subnetworks that are expected to lose larger numbers of packets. The default setting is 
2. 

Last Member Query 
Interval (1-25) 

Enter a value between 1 and 25 to specify the maximum amount of time between 
group-specific query messages, including those sent in response to leave group 
messages. The default is 1 second. 

Click the 

<<Back

 button to return to the previous window. 

Click the 

Apply

 button to accept the changes made. 

 

IGMP Subscriber Source Network Check Settings 

This window is used to configure the flag that determines whether or not to check the subscriber source IP when an 
IGMP report or leave message is received. When this option is enabled on an interface, any IGMP report or leave 
messages received by the interface will be checked to determine whether its source IP is in the same network as 
the interface. If the check failed for a received report or leave message, the message won’t be processed by IGMP 
protocol. If the check is disabled, the IGMP report or leave message with any source IP will be processed by the 
IGMP protocol. 

 

To view the following window, click 

L3 Features > IP Multicast Routing Protocol > IGMP > IGMP Subscriber 

Source Network Check Settings

, as shown below: 

 

Figure 5-95 IGMP Subscriber Source Network Check Settings window 

 

The fields that can be configured are described below: 

Summary of Contents for xStack DGS-3120 Series






























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for xStack DGS-3120 Series

3Com SuperStack II Important Information preview
SuperStack II
Brand: 3Com Pages: 2
3Com CoreBuilder 5000 Quick Start And Reference preview
CoreBuilder 5000
Brand: 3Com Pages: 16
3Com CoreBuilder 9000 Quick Installation Manual preview
CoreBuilder 9000
Brand: 3Com Pages: 24
N-Tron 608MFX-ST Specifications preview
608MFX-ST
Brand: N-Tron Pages: 2
6TL YAV904X8 Manual preview
YAV904X8
Brand: 6TL Pages: 25
WAGO 852-112/000-001 Manual preview
852-112/000-001
Brand: WAGO Pages: 30
S+S Regeltechnik Premasreg 716 Series Operating Instructions, Mounting & Installation preview
Premasreg 716 Series
Brand: S+S Regeltechnik Pages: 32
DeLOCK 87699 User Manual preview
87699
Brand: DeLOCK Pages: 8
Zamel GRL-01 Instruction Manual preview
GRL-01
Brand: Zamel Pages: 4
e+p UHD 131 Manual preview
UHD 131
Brand: e+p Pages: 2
Cabletron Systems SmartSTACK 100 User Manual preview
SmartSTACK 100
Brand: Cabletron Systems Pages: 110
FS S5850-24XMG Quick Start Manual preview
S5850-24XMG
Brand: FS Pages: 43
Accton Technology EtherHub-24s Quick Installation Manual preview
EtherHub-24s
Brand: Accton Technology Pages: 7
QSFPTEK S5300-48T4X Quick Start Manual preview
S5300-48T4X
Brand: QSFPTEK Pages: 8
3onedata IES2016-16T Series Quick Installation Manual preview
IES2016-16T Series
Brand: 3onedata Pages: 3
Synergy Global Technology LCDK1023 User Manual preview
LCDK1023
Brand: Synergy Global Technology Pages: 9
TRENDnet TI-G102 Quick Installation Manual preview
TI-G102
Brand: TRENDnet Pages: 2
Altinex 400-0226-003 User Manual preview
400-0226-003
Brand: Altinex Pages: 14

Brands by name

Popular brands

Load more brands