xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
58
•
Add to group
– Add a candidate to a group. Clicking this option will reveal the following dialog box for
the user to enter a password for authentication from the Candidate Switch before being added to the
SIM group. Click
OK
to enter the password or
Cancel
to exit the dialog box.
Figure 3-31 Input password window
•
Remove from Group
– Remove an MS from the group.
Device
•
Configure
– Will open the Web manager for the specific device.
View
•
Refresh
– Update the views with the latest status.
•
Topology
– Display the Topology view.
Help
•
About
– Will display the SIM information, including the current SIM version.
Figure 3-32 About window
Firmware Upgrade
This screen is used to upgrade firmware from the Commander Switch to the Member Switch. Member Switches will
be listed in the table and will be specified by
Port
(port on the CS where the MS resides),
MAC Address
,
Model
Name
and
Version
. To specify a certain Switch for firmware download, click its corresponding check box under the
Port
heading. To update the firmware, enter the
Server IP Address
where the firmware resides and enter the
Path
\ Filename
of the firmware. Click
Download
to initiate the file transfer.
To view the following window, click
Management > Single IP Management > Firmware Upgrade
, as shown
below:
Figure 3-33 Firmware Upgrade window
Configuration File Backup/Restore
This screen is used to upgrade configuration files from the Commander Switch to the Member Switch using a TFTP
server. Member Switches will be listed in the table and will be specified by
ID
,
Port
(port on the CS where the MS
Summary of Contents for xStack DGS-3120 Series
Page 1: ......
