manualshive.com logo in svg

D-Link xStack DGS-3120 Series, Reference Manual

Share
Download
D-Link xStack DGS-3120 Series Reference Manual Download Page 419

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide 

409 

 

 

Figure 9-14 DHCP Server Pool Settings (Edit) Window 

 

The fields that can be configured are described below: 

Parameter 

Description 

IP Address 

Enter the network address of the pool. 

Netmask 

Enter the Netmask for the network address. 

NetBIOS Node Type 

NetBIOS node type for a Microsoft DHCP client. 

Domain Name 

Domain name of client. The domain name configured here will be used as the default 
domain name by the client. 

Boot File 

File name of boot image. The boot file is used to store the boot image for the client. 
The boot image is generally the operating system the client uses to load. If this option 
is input twice for the same pool, the second command will overwrite the first 
command. If the boot file is not specified, the boot file information will not be provided 
to the client. 

Next Server 

Enter the next server IP address. 

DNS Server Address 

IP address of DNS server. Specifies the IP address of a DNS server that is available 
to a DHCP client. Up to three IP addresses can be specified. 

NetBIOS Name Server 

IP address of WINS server. Windows Internet Naming Service (WINS) is a name 
resolution service that Microsoft DHCP clients use to correlate host names to IP 
addresses within a general grouping of networks. Up to three IP addresses can be 
specified. 

Default Router 

IP address of default router. Specifies the IP address of the default router for a DHCP 
client. Up to three IP addresses can be specified. 

Pool Lease 

By default, each IP address assigned by a DHCP server comes with a one-day lease, 
which is the amount of time that the address is valid. Tick the 

Infinite

 check box to 

have infinite lease. 

Days

 – Days of lease. 

Hours

 – Hours of lease. 

Minutes

 – Minutes of lease 

Click the 

Apply

 button to accept the changes made. 

Click the 

<<Back

 button to discard the changes made and return to the previous page. 

 

DHCP Server Manual Binding 

An address binding is a mapping between the IP address and MAC address of a client. The IP address of a client 
can be assigned manually by an administrator or assigned automatically from a pool by a DHCP server. The 
dynamic binding entry will be created when an IP address is assigned to the client from the pool network’s address.  

To view this window, click 

Network Application > DHCP > DHCP Server > DHCP Server Manual Binding 

as 

shown below: 

Summary of Contents for xStack DGS-3120 Series






























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands