manualshive.com logo in svg

D-Link xStack DGS-3120 Series, Reference Manual

The D-Link xStack DGS-3120 Series is a cutting-edge networking solution equipped with advanced features. Easily understand its capabilities and configuration options by downloading the comprehensive "Reference Manual". Find the free manual at manualshive.com and unlock the full potential of your D-Link xStack DGS-3120 Series with just a click.

Share
Download
background image

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide 

48 

 

 

Figure 3-16 Loopback Interface Settings - Add/Edit window 

 

The fields that can be configured are described below: 

Parameter 

Description 

Interface Name 

The name of the loopback interface. The loopback interface has the same name 
domain space as the regular interface. So the name can’t be a duplicate of any of the 
regular interfaces. 

IPv4 Address 

Enter a 32-bit IPv4 address for the loopback interface. 

Subnet Mask 

Enter a subnet mask to be applied to the loopback interface. 

Interface Admin State 

Use the drop-down menu to enable or disable the loopback interface. 

Click the 

<<Back

 button to discard the changes made and return to the previous page. 

Click the 

Apply

 button to accept the changes made for each individual section. 

 

Management Settings 

Users can stop the scrolling of multiple pages beyond the limits of the console when using the Command Line 
Interface.  

 

This window is also used to enable the DHCP auto configuration feature on the Switch. When enabled, the Switch 
is instructed to receive a configuration file from a TFTP server, which will set the Switch to become a DHCP client 
automatically on boot-up. To employ this method, the DHCP server must be set up to deliver the TFTP server IP 
address and configuration file name information in the DHCP reply packet. The TFTP server must be up and 
running and hold the necessary configuration file stored in its base directory when the request is received from the 
Switch. For more information about loading a configuration file for use by a client, see the DHCP server and/or 
TFTP server software instructions. The user may also consult the 

Upload Log File

 window description located in 

the 

Tools

 section of this manual. 

 

If the Switch is unable to complete the DHCP auto configuration, the previously saved configuration file present in 
the Switch’s memory will be used. 

 

This window also allows the user to implement the Switch’s built-in power saving feature. When power saving is 
enabled, a port which has a link down status will be turned off to save power to the Switch. This will not affect the 
port’s capabilities when the port status is link up. 

 

Users can also configure Password Encryption on the Switch. 

 

To view the following window, click 

Management > Management Settings

, as shown below: 

 

Summary of Contents for xStack DGS-3120 Series






























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for xStack DGS-3120 Series

3Com 4007 Release Note preview
4007
Brand: 3Com Pages: 128
3Com 4005 Datasheet preview
4005
Brand: 3Com Pages: 2
3Com 4200G 12-Port Configuration Manual preview
4200G 12-Port
Brand: 3Com Pages: 422
3Com 3CR16708-91 - OfficeConnect Managed Switch 9 Datasheet preview
3CR16708-91 - OfficeConnect Managed Switch 9
Brand: 3Com Pages: 4
3Com 3CR13501-73 Release Note preview
3CR13501-73
Brand: 3Com Pages: 5
3Com 3CR13500 Software Install Manual preview
3CR13500
Brand: 3Com Pages: 30
3Com 5500G SERIES Getting Started Manual preview
5500G SERIES
Brand: 3Com Pages: 36
3Com 3CNJ220-CRM Datasheet preview
3CNJ220-CRM
Brand: 3Com Pages: 4
3Com Baseline 2226-PWR Plus User Manual preview
Baseline 2226-PWR Plus
Brand: 3Com Pages: 77
3Com 3CRWX120695A Reference Manual preview
3CRWX120695A
Brand: 3Com Pages: 570
3Com OfficeConnect WX1200 Release Note preview
OfficeConnect WX1200
Brand: 3Com Pages: 28
3Com Baseline 2226-PWR Plus Datasheet preview
Baseline 2226-PWR Plus
Brand: 3Com Pages: 4
3Com CoreBuilder 6000 Supplementary Manual preview
CoreBuilder 6000
Brand: 3Com Pages: 31
3onedata TNS5500D Series Quick Start Manual preview
TNS5500D Series
Brand: 3onedata Pages: 5
3onedata IPS7112G-4GS-8GPOE Quick Installation Manual preview
IPS7112G-4GS-8GPOE
Brand: 3onedata Pages: 3
Pathway connectivity solutions 1016 Manual preview
1016
Brand: Pathway connectivity solutions Pages: 2
Gilat SkyEdge II-c Capricorn Pro 4 AC Series Installation Notes preview
SkyEdge II-c Capricorn Pro 4 AC Series
Brand: Gilat Pages: 2
AMX AVS-OCT-6448-210 Product View preview
AVS-OCT-6448-210
Brand: AMX Pages: 1

Brands by name

Popular brands

Load more brands